← All posts

2026-11-16 · 7 min read · Salt Lake County

Buying an Older Salt Lake County Home: What Should You Know About Knob-and-Tube and Aluminum Wiring?

A Kaysville home with the Wasatch foothills behind it

What should you know about old wiring before buying in Salt Lake County?

Know three things before you fall for an older house: what type of wiring is in the walls, what condition the main panel is in, and whether your insurance company will cover it. Many Salt Lake County homes built before the late 1950s may still have some original knob-and-tube wiring. Homes from roughly the mid-1960s to the mid-1970s may have aluminum branch wiring. Neither one is automatically a reason to walk away. Both are reasons to ask questions before your inspection period ends.

Charisse Walker is a real estate agent with Chalker Properties Group in Salt Lake and Davis County, Utah, and a licensed mortgage lender. This article walks through what each type is, how an inspector finds it, what it can do to your insurance quote, how to price the repair and how to write your offer so you are protected. It is general education, not an electrician's opinion, so any specific house needs a licensed electrician's eyes.

What is knob-and-tube wiring?

Knob-and-tube is one of the earliest forms of home electrical wiring. Individual wires run through the walls and attics, held in place by ceramic knobs and passed through ceramic tubes where they cross framing. There is no ground wire. It was common in homes built roughly before the 1940s and into the 1950s in some places.

Plenty of it has been replaced over the decades, and many older Salt Lake County homes are a mix: some rooms rewired, some original circuits left behind. That mix is the thing to find out about. A house that was fully rewired in the 1980s is a different purchase than one where the upstairs bedrooms still run on the original system.

Why it matters to a buyer:

  • No ground. Modern three-prong outlets with no ground behind them can mislead people into thinking they are protected.
  • Insulation. Knob-and-tube was designed to give off heat into open air. Blown-in insulation around it can be a problem, and a past owner may have done exactly that.
  • Age of the insulation on the wire. Old cloth-wrapped wire can become brittle, and past amateur splices are common.
  • Insurance. Some insurers will not write a policy, or charge more, when active knob-and-tube is present.

What is aluminum branch wiring?

Aluminum wiring was used in some homes built during a period when copper was expensive. It behaves differently from copper. It expands and contracts more with heat, and the connections at outlets and switches can loosen over time. Loose connections create heat, and heat is the concern.

If you see aluminum wiring in a report, the usual path is not necessarily a full rewire. Electricians often talk about specific repairs at the connection points, using approved connectors or devices rated for it. Costs and methods vary by house, so get a written scope from a licensed electrician rather than guessing. What you want to avoid is learning about it at the end of your inspection window with no time to get a quote.

What about the electrical panel?

The main panel is the other big item. Your inspector will open it and look at the brand, the age, whether the wiring inside is tidy, whether breakers are doubled up where they should not be and whether the capacity makes sense for the house. A home with a panel that is too small for modern loads, such as an added electric vehicle charger, a hot tub or a finished basement, may need an upgrade even if the wiring is fine.

Some panels from certain manufacturers and eras have drawn safety attention over the years. Your inspector can tell you if the one you are looking at is on that list. If they flag it, ask the electrician to look at it before you remove your inspection contingency.

How does an inspector find it?

A general home inspector looks at the visible parts: the panel, outlets, switches, the attic and any exposed wiring in the basement or crawl space. In an older home, ask them to specifically look for knob-and-tube and aluminum wiring, and to note whether the home has been partially rewired. Ask whether they test outlets for grounding and whether they found any signs of overheating at outlets, such as discoloration.

An inspector cannot see inside closed walls. That is one reason some buyers of older homes hire a licensed electrician for a separate review. The cost is small compared to the price of the house, and the written report gives you something to negotiate from.

The article on what to expect at a home inspection in Utah covers how the process works and how to prepare.

How do you check on insurance before you are committed?

This is the step buyers skip. Call your insurance agent early, tell them the year the house was built and what you know about the wiring, and ask whether they will write a policy and at what condition. Some will ask for an electrician's letter. Some will want a plan to update. Getting that answer before your inspection period ends is far better than learning at closing that you cannot get coverage.

Your lender will also require homeowners insurance, so an uninsurable house can affect your loan timeline. If you are working with a lender, let them know early. If you want to talk through how your loan fits into the timeline, there is a helpful overview in how to get pre-approved for a home loan in Utah.

What are the most common mistakes?

  1. Assuming a modern-looking outlet means modern wiring. A new cover plate can sit on top of a very old circuit.
  2. Skipping the insurance call. Ask before the inspection window closes.
  3. Taking the seller's word for "it was all redone." Ask for permits, receipts or the electrician's name. A rewire done without a permit may not meet current requirements.
  4. Waiting for the electrician until after you have removed contingencies. You lose most of your position.
  5. Treating it as all or nothing. Many older homes can be updated in stages. Your goal is to know the scope and the cost.
  6. Forgetting about the rest of the house. Old wiring is often a clue that other systems are also original, such as plumbing, the furnace and the roof.

What does a typical situation look like?

Here is a typical example, not a specific client. A buyer writes an offer on a brick bungalow in Salt Lake County with original character and a fair price. During the inspection, the inspector finds a mix of modern wiring in the kitchen and what looks like knob-and-tube in the attic above two bedrooms. The buyer's insurance agent says they will write a policy once an electrician confirms the old circuits are no longer active or are updated.

The buyer hires an electrician who walks the house, identifies which circuits are live, and writes a scope with a quote to replace them. The buyer's agent sends the quote to the seller and asks for a credit or a repair before closing. Because the buyer asked for the electrician early, there is time for the seller to respond. If the seller declines, the buyer still has the information to decide whether the price makes sense with the added cost, or to walk away within the contract deadlines.

The point is the order: find out, price it, then negotiate. Doing it in reverse is how buyers end up with a surprise.

How do you write this into your offer?

Your agent can help you structure your offer and your inspection deadlines. Under the Utah purchase contract, your due diligence and financing deadlines matter, and your agent will help you choose dates that give a licensed electrician time to look. If a house is clearly older, it is reasonable to ask for a longer inspection window or to schedule your inspector and electrician in the same week.

For repairs, you generally have three options after the inspection: ask the seller to fix it, ask for a credit or price reduction, or accept it as is. Which one fits depends on the scope, your lender's rules and what the seller will agree to. A seller who has been told the cost with a written quote is much easier to negotiate with than one handed a vague worry. Read more in how to negotiate repairs after inspection in Utah.

Asking about the electrical system on day one, rather than day ten, is the simplest way to avoid a surprise.

Frequently asked questions

Is knob-and-tube wiring illegal? Existing wiring is generally allowed to remain in many places if it is in sound condition, but new work has to meet current code. Local rules and insurers vary, so ask your inspector and your insurance agent.

Can I finance a home with older wiring? Often yes, but the lender and the appraiser may flag safety issues, and the insurer has to agree to cover it. Ask your lender early.

Do I have to rewire the whole house? Not always. A licensed electrician can tell you which circuits are active and what a partial update would involve.

Should I hire my own electrician? In an older home, many buyers do. It is a small cost compared to a surprise.

Who decides what is a safety issue? Your inspector and electrician give an opinion. Your lender, your insurer and local code officials may have their own requirements.

What is the next step?

If you are looking at older homes in Salt Lake County and want a plan for the inspection, the insurance call and the offer, start with a conversation. Bring the address, and we can map out the questions to ask before your deadlines begin. Contact Chalker Properties Group and we will walk through the next steps, simplified.

The method

Where this fits in how we sell